|
|
|
|
|
|
The Jarvis Model 50D -- hydraulically powered horn cutter.
•For beef horns that are not accessible with guillotine type dehorners
•For front and hind beef hock cutting through the bone or joint
•With a 2.1 second cutting cycle, the 50D is a high production, high performance tool - used for the most demanding applications, especially where one operator cuts both horns and front hocks
•Best possible hygiene wtih updated, virtually all stainless steel construction - minimal corrosion problems
•Robust construction, including ground solid stainless steel blades, for long trouble-free life
•Anti-tie down controls for operator safety
•Meets national and international requirements for hygiene and safety.
|
|
Model 50D |
Specifications: |
Drive |
|
Hydraulic |
Cutting Force |
11500 lbf |
51 kN |
Cutting Cycle Time |
2.1 sec |
Control Handles |
Pneumatic Dual Anti-tie Down |
40 - 50 psi |
2.8 - 3.4 bar |
Blade Opening |
4.5 in |
114 mm |
Overall Length |
24 in |
610 mm |
Weight |
60 lbs |
27 kg |
Hydraulic Power Unit |
Motor Power |
10 hp |
7457 W |
Operating Voltage |
230 / 460 V, 3 phase, 60 Hz |
other voltages and 50 Hz available |
Hose Length |
16 ft |
5 m |
Oil Capacity |
30 gal |
114 L |
Overall Dimensions (l x w x h) |
38 x 24 x 33 in |
965 x 610 x 838 mm |
Weight (without oil) |
380 lbs |
172 kg |
Equipment Selection and Accessories |
Order Number
|
Model 50D |
|
4025113 |
Hydraulic Power Unit |
|
|
with hydraulic and control hoses |
|
230 / 460 V, 3 phase, 60 Hz* |
4027088 |
Balancer |
4042021 |
Blade |
|
|
Moving Blade |
1023563 |
|
Fixed Blade |
1023564 |
*For other configurations: please specify voltage, hertz and intended country of operation when ordering |
|
|
|